Month: January 2019

Tips for Safe Storage of Diesel

Safe storage of fuel is an utmost priority these days because fuel is an extremely hazardous substance that could create major damage to the environment and endanger the lives of many people. Diesel spills and leakage not only have a serious environmental impact, but also can get you to court. Therefore, it is vital that you store diesel in a durable and secure fuel tank. This ensures your compliance to regulations and guard against pollution.

 

Choose a Safe Location

Location is very important when it comes to fuel storage installations. Avoid installing your fuel tank within close range of any water source to protect the environment. Do not to put your tank in an area that has a high probability of being flooded because pipelines could break and could cause oil spillage.

Make sure also that your tank is located in an easy accessible area for deliveries, filling, and maintenance. There should also be enough room for the support base, as your tank will be much heavier once it is filled. If you are not sure about this, read the regulations or contact the supplier or the manufacturer of the tank for advice.

 

Ensure Regulatory Compliance

The main regulations covering the safe diesel storage include pollution prevention, fire safety regulations, building regulations, and tank construction.

The guidelines for pollution prevention is in place to help people look after their fuel tanks and avoid any chance of environmental pollution. The fire safety regulations for installing fuel tanks are included in the building regulations. Regulations focus on the standard capacity and the required distance of the tank from a building, and other safety measures.

You’ll find that there are various minimum standards when it comes to tank construction, and it varies from region to region. However, the safest and most compliant type is the bunded fuel tank. These tanks have a second line of defense called the bund. Bunded diesel tanks are also known as a tank within a tank.  These tanks are now a mandatory in literally all commercial and industrial fuel tank installations. They are also required in many domestic premises.

 

Practice Safe Tank Maintenance

It is highly recommend that fuel storage systems be checked yearly. Inspection should also be carried out by a certified engineer. Proper maintenance of the tank should also include regular check-up by your trained staff at least once a week for early signs of possible problems. Look out for sudden dips in the level of fuel, signs of damage such as cracks or corrosion in the walls of the fuel tank. A gauge is also required to measure the contents of the tank to avoid overfilling and spillages. All your staff should also know where the shut off valve of the tank is. In case of emergency, all your staff should know what to do.

All About Drill Pipes

Drill pipes are industrial tubular used in drilling rigs to bore into the ground. These pipes are widely used in four major industries, including the oil industry, gas industry, water systems industry, and the construction industry specifically the HDD industry or the Horizontal Directional Drilling. This cylindrical tool is needed by most drilling projects. However, it is used the most in the oil and gas industry.

This drill pipe is a 31-feet proportion, known as the string, with each portion screwed together. The string also comprises of the collars and the heavy-weight cylinders. The drill bit that does the precise drilling is located at the bottom part of the string. Most drill bits are made of diamonds, providing fast and easy drilling.

 

Drill Pipes for Oil Drilling

 

In the past, drilling for oil would have drill pipes bore into the earth vertically using the drilling rigs. Today however, the direction of drilling can also be horizontal, depending on the orientation and position of the oil well. Unlike other industries, drill pipes used in the oil drilling is specifically made and designed to withstand toughest working conditions. This is primarily because it used in extreme depths and the extreme conditions beneath the earth. Oil drilling can be very deep and the string could reach for more than 30,000 feet.

 

Drill Pipes for Construction

 

Another industry that uses this superior product is the Horizontal Directional Drilling (HDD) industry, which is underground construction. In this industry, the drill pipe is used to bore major roadways and under waterways tunnels. It is the number choice of tool for construction companies especially for construction sites with unacceptable trenches. The drill hole is then used for many different utility pipelines such as water, electricity, fiber optic, oil, and gas.

 

HDD drilling rigs are not the same as oilfield rigs. In fact, they are the opposite because they are almost completely lying flat or in a horizontal position in the Horizontal directional drilling. The larger HDD rigs, on the other hand, have exactly the same structure as that of the oilfield rigs.

 

Drill Pipes for Water Wells

 

The drill pipes are widely used in the water well industry. This premium cylindrical product and the drilling rigs have a lighter duty in the water well drilling industry because the well is quite shallow in comparison with oil wells.

 

Key Points

 

Drill pipes can be used in many different purposes because they come in a variety of lengths. It is important to choose the highest quality drill pipe especially when you are using it in oil drilling. Make sure you buy this equipment from reputable sellers. You do not want to compromise the quality of the product over its price. Invest in a good drill pipe if you want to get the best and safest output of your project.

Sonic drilling rigs are now being used too..

Electronics Design: The Golden Rules to Keep in Mind

Electronics design can be complicated and designers usually face the issue of wasted resources and rework. This is because of the use of small tracks for circuit layout since not all components could not fit. One more reason is the rush to meet the deadlines.

Communicating with the manufacturer is also very important. If something is not clear or the designer failed to share all design schematics and components with clarity, the manufactured product can be expected to be flawed. Technical challenges also come with these things.

Pre and post design analyses are highly important in order to ensure proper electronics design and circuit outcome. These includes the following considerations.

Right Board Spacing

Choosing the right spacing will save you a lot of money and rework. It is very important to make sure that you have the right digital representation of the circuit before proceeding to the production. At the same time, you need to define all components and circuit schematic during the design. If you happen to miss out a component, you have to define it in the CAD library in the proper way and process all information.

 

Protection Against ESD

ESD or electrostatic discharge is caused by sudden electrical energy. This is developed by electrostatic induction or static electricity which flows from one charged object to the next. The components of the electric circuit are very sensitive to ESD. This is why design and manufacturing floor areas need to invest in ESD-protected areas where highly charged objects are kept out.

 

Save your Circuit from EMI

EMC or electromagnetic compatibility is important in ensuring the quality of the circuit that is being designed. This also helps ensure that the electric circuits are not disturbed by EMI or electromagnetic interference.

One reason for EMI to rise is due to radio-emission of another electronic object. This affects the electric circuit by providing it with wrong data or by making the system stop. You can perform EMI shielding by using components such as capacitor filters and ferrite beads.

 

Create Resilience

There will always be a time when two charged ends of an electronic device are connected to wrong terminals. One best example is attaching a battery in a reverse polarity to an electronic device. If the design of the circuit is not properly protected against reverse popularity, you can expect some hazardous outcomes such as frying or malfunctioning of the circuit. As a precautionary measure, you can connect the heavy load that carried the microprocessor output drivers to a large resistor. You can also use a diode bridge to rectify the input and ensure that there is correct polarity in the circuit.

These rules will serve as your guide as accomplish your design. Having them in mind will spare you the trouble of making mistakes that may or may not be easy to fix.

 

Outdoor Lighting Melbourne: Tips for Every Beginner

Outdoor lighting in Melbourne is becoming a trend. Creating a design for your home may not be at the top list of the things you want to do your home improvement project. However, for sure there are some practical and aesthetic reasons why you decide to do it. It can be to increase your home’s safety and security or to provide added appeal to it. Here are some tips that can be of big help as you try to create a simple but professional-looking lighting effects for your home.

 

Get Started

 

Among the very first things you have to consider is your recent setup. Do you have light fixtures already installed or you have the needed outlets and connections for the job? Most newly constructed homes today are equipped with outdoor lighting sources on the left and right corners. If there is no basic setup such as this, then you can hire an electrician to do it for you.

If your home has less conventional façade, it would be best to install additional lighting sources so you can highlight specific areas.

 

Choose your Subject

 

Regardless if you want to light the front or backyard of your home, you have to decide on the things that you want to highlight in your design. Do you want to highlight the shrubs or trees? Or your landscape, the fountain, or the courtyard area? It is very common for the lighting sources to be as high as the eaves of houses or even higher. However, exceptions are always allowed. You can opt to combine high and low lights or try other options that will suit your overall design.

 

Light Choices

The most common choices for a Melbourne outdoor lighting include path lights, spotlights, and flood lights. You may want to consider a combination of these three if you want your design to be more elaborate. Flood lights cast a wide beam that is perfect for large areas while spotlights disperse a narrower beam of light. Path lights are best for paths and lighting walkways.

 

Temperature and Degrees

 

CCT or correlated color temperature is another important factor to consider in your lighting design. This is the light color produced by your light source. It is measured in a temperature scale or Kelvin (K). The higher its Kelvin is, the closer the color of light will be to the actual sunlight. When buying a bulb, you can see the Kelvin value on the packaging.

 

Effects

The degree spread of the lamp plays an important role when thinking of what you want to illuminate. At the same time, you should opt for fixtures for external lights so your light source is obscured or hidden.

If you want to light a path in your yard or your garden, you can place your light inside of a trellis or a tree as it faces down the area that you want to illuminate. This is called as downlighting.

On the other hand, you can do moonlighting. You can achieve this by placing a big light fixture high up a tree and make sure that it is angled toward the ground so you can achieve shadow patterns on the ground like a natural moonlight. Another effect you can try is silhouetting. You can place a spotlight behind a feature. This will create an illuminated backdrop.

Making your outdoor lighting Melbourne a success can be made easier with all these tips. Also, when you know what you want and how to achieve them, the entire process becomes a lot more fun and exciting.

 

Machinery Maintenance: How Important it is to Perform One?

Making sure that your machine is always well-maintained is one of the most important aspects that every industry needs to secure. Since the start of industrialization, those who were professionals and experts in repairing, maintenance, and diagnosing machines have been so invaluable. With this being said, whenever a machine performs an important and systematic role, such as the ones that work with the application of stretch films and packaging, machinery maintenance become more important.

As we would always hear, prevention is better than cure. This saying holds so much truth and this is very much applicable in the use and maintenance of a machine. Having a good maintenance plays a great role in the use of your machine. Below are some of the most common benefits that companies can get from a good maintenance system.

 

Benefits of Maintenance

Helps Improve Performance

A well-maintained machine definitely works better compared to those that are not. For instance, a printer would have less wasted toner and will be able to increase its print volume. At the same time, toner application would be smoother and streaks and other unpleasant marks will be kept at bay. Constant maintenance will keep the print quality at its best.

 

Helps Prevent Damage

Making sure that every part is functioning well and are operational is help identify problems immediately and prevent damages at an earlier time. This helps avoid extensive repairs and unnecessary costs. With the help of regular maintenance, wear and tear will be minimized, thus prolonging the life of the machine.

 

Helps Improve Efficiency

In a printer for example, having less downtime would mean that the printer would be able to print more. A proactive maintenance will eliminate any distractions and any problem caused by performance problems. This will help keep the team assigned on the task to do their job and meet their deadlines. Moreover, performing a machinery maintenance will avoid failures in the machine that could get in the way of your business.

 

Do It Yourself

Having your own do it yourself maintenance kit always ready will be very helpful to ensure that the machine will be running smoothly. This means that you can always have a check of your machine and if these are minor problems, you can simply do or fix them by yourself.

 

Maintenance Program

A maintenance program is a great investment in ensuring the wellness of your machine. This will also help control the costs your have to spend while improving performance.

Performing a good equipment maintenance can be very simple, yet an effective way to make sure that the machine will run longer and offer the best quality results. With this, you can maximize the use of your machine, making it a worthy investment for your business.

 

What to Look for in a Good Chemical Storage Cabinet

Many work environments today pose different hazards and risks for personal injury and pollution. In most cases, this risk is caused by chemicals that are incorrectly handled and stored. The threat of injury or damage can be very serious and this is something that should be prevented. You can do so by using the right chemical storage cabinet.

Having a safety storage cabinet means that you have the first line of defense against contamination, spills, and fires. As the name itself suggests, such type of cabinet is used to safely store corrosives, chemicals, and flammables. Unlike with low quality cabinets, a professional grade model is designed to withstand force, heat, and pressure in order to protect the chemicals inside. But with a variety of storage cabinets available today, how can you be certain that the one you are getting will do its purpose? Here are some tips on how to properly choose the right chemical storage cabinet.

What are Your Storage Needs?

The primary step in choosing the right storage cabinet is for you to know the storage needs required in your company. Storage cabinets are typically broken down in various categories, based on their own features and capability of storing. For example, a pesticide storage cabinet is specifically designed to keep toxic insecticide and pesticide chemicals. It is necessary to do an analysis of the chemicals present in the company so you can determine the types of cabinets that are perfect for your needs.

 

Material of Cabinet

The materials that are being used in the making of a storage cabinet vary from one cabinet to the next. But for professional-grade safety types of cabinets, some of the most commonly used materials would include polyethylene and stainless steel. These materials offer the highest level of strength, longevity, and durability which are all needed in storing hazardous chemicals.

In some cases, you may find some cabinets that are coated with corrosion-resistant powder. This serves as another layer of protection. In case a toxic or corrosive chemical tip over inside, the powder coating will provide protection to the cabinet so damage is prevented.

 

Space Accommodation

The size of your cabinet is another factor that should be considered when looking for the right cabinet that meets your needs. For flammable liquids, the size of the cabinet ranges from 4-90 gallons. You need to know the storage needs of your company so you can choose the right size that can store your chemicals properly.

The use of a storage cabinet is needed to ensure safety and make sure that the company is free from the dangers caused by pesticides, corrosives, flammables, combustibles, and other hazardous chemicals which are handled improperly. Instead of leaving these chemicals out in the open, with safety storage cabinets, you can always keep and store them safely.